Experiments

1．Measure the heat conductivity coefficient of poor conductor by steady-state method and compare to the theoretical value

2．Measure the heat conductivity coefficient of aluminum alloy bar to analyze the defect of steady-state method.)

Features

a) Separate the temperature controller and testing jig to guarantee safe and convenience.

b) Controlling temperature and testing temperature are used by two different meters for no effects.

c) Adopting RTD sensor to measure the temperature of heating plates and cooling plates. The LED can display the temperature directly toimprove the accuracy. (For different requirements, we can change the RTD to thermocouple to improve automatic freezing temperature compensation circuit.

d) User can set the maximum temperature by PIN to avoid high temperature harming sensors and instruments.

e) Equipped with poor conductor, metal and etc. Adopting comparison method to measure heat conductivity coefficient of different materials.

Specifications

PID heating

Heating temperature: indoor temperature-120℃, controlling accuracy: ±1℃,resolution: 0.1℃

Heating voltage: lower than 36V for safe heating, higher than 25V for safe. Equipped with fan to speed up the cooling time.

Range of timing: 0-9999.9s, resolution: 0.1s

Test sample

Four samples: duralumin, silicone rubber, bakelite plate, air.

The cooling copper round plate

Sheet copper, good thermal conductivity, diameter: 50mm, thickness: 10mm

Experiments and data

Record and calculate the heating conductivity coefficient of different materials.